When considering buying a rebuilt piano, or having a piano rebuilt, particularly an expensive one, the rebuilder's experience level should count heavily in your decision. The complete rebuilding of a piano requires many dissimilar skills. The skills required for installing a soundboard, for example, are very different from those required for installing a new set of hammers or for regulating the action. Mastering all of these skills can take a very long time. In a sense, you should be shopping for the rebuilder as much as for the piano.
Many rebuilders contract out portions of the job, particularly the refinishing of the piano's case, to others who have special expertise. Although this has always been so, more recently groups of technicians, each with his or her own business and shop, have been openly advertising their close, long-term collaboration with one another on rebuilding jobs. In a typical collaboration of this type, one person might rebuild the strung back or soundbox (soundboard, bridges, pinblock, strings, tuning pins, cast-iron plate); another would rebuild the action and do the final musical finishing, such as regulating and voicing; and the third would refinish the case. Collaboration of this kind is a positive development, as it means that each technician does only what he or she does best, resulting in a better job for the customer. But make sure you know with whom you are contracting or from whom you are buying, and which technician is responsible for making things right if problems arise.
It may occur to you that you could save a lot of money by buying an unrestored piano and having a technician completely restore it, rather than buying the completely restored piano from the technician. This is often true. But the results of a rebuilding job tend to be musically uncertain. That is, if you are particular in your taste for tone and touch, you may or may not care for how the instrument ultimately turns out. For that reason, especially if a lot of money is involved, you might be better off letting the technician make the extra profit in return for taking the risk.
"Vintage" pianos are those made during the golden years of piano-making in the United States—roughly, from 1880 to World War II. More specifically, the term usually refers to the Steinway and Mason & Hamlin pianos made during that period, though it's occasionally applied to other great American makes as well. In the last few decades the demand for these pianos, and consequently their prices, has mushroomed due to a (until recently) strong economy, increased entrepreneurial activity on the part of rebuilders and piano brokers, allegations by rebuilders and others that today's new pianos are not as well made as the older ones were, and the purchase of many older Steinways by Steinway & Sons itself for rebuilding in its factory.
What makes these vintage pianos so alluring? Many musicians and technicians believe that these instruments, when rebuilt, sound and play better than new pianos. However, no one knows for sure why this should be so, since most of the components in the piano are replaced during rebuilding. Some point to the fact that Steinway operated its own plate foundry until about World War II, afterward using a commercial plate foundry (which it now owns). Because this radical change in the manufacture of such an important component roughly corresponds with the end of the vintage era, and because the plate is one of the few original parts to survive the rebuilding process, some speculate that it holds the key to the difference. Others say it has to do with changes in the quality of the wood available to Steinway and other companies. Still others say it wasn't any single thing, but rather a combination of many fortuitous factors, including extremely skilled and talented craftsmen, that enabled these companies to make such special pianos during that period, but allegedly not afterward (though that doesn't explain why the rebuilt ones from that period should be better).
SPRING 2010 -- page 61
TABLE OF CONTENTS
Hybrid & Player Pianos